Calcium Carbonate and Calcium Sulfate Scale Control

AQUACID phosphonates and MAXINOL polymers have a high threshold inhibition efficiency where small dosages prevent precipitation of CaCO3 and CaSO4 from supersaturated systems. Operating the system at high hardness and alkalinity increases the scaling potential (LSI, RSI) and reduces corrosion tendency. Synergistic combinations of phosphonates and polymers prevent precipitation of these salts, disperse the dirt and the small amount of precipitates that may form and provide corrosion control.

Products Recommended:

Aquacid 101EX (PBTC 50%) - For high hardness systems, high LSI conditions
Aquacid 105EX (HEDP 60%) - For moderate scale potential
Aquacid 108EX (AMP 50%) - For systems that do not use chlorine as a part of treatment and where copper metallurgy is not used
Maxinol 10 (25% PAA) - Excellent CaCO3, CaSO4 inhibitor and general purpose dispersant
Maxinol PM 200 (50% PMA) - Excellent CaCO3, CaSO4 and silica inhibitor and general purpose dispersant
Maxinol C4100/5100 (48% Na-PAA) - Similar to M 10, partially neutralized product.


© Copyrights 2006 Aquapharm Chemical Pvt. Ltd. All Rights Reserved. Created & Maintained by : Link Software & Systems Pvt. Ltd.